Field notesConcrete Repairs

Concrete Cancer: What Causes It, How to Spot It, and What Remediation Really Involves

Concrete cancer is the most expensive defect most strata buildings will ever face. Here is a clear explanation of what it actually is, why coastal Queensland buildings are particularly exposed, and what good remediation looks like.

10 October 2025 · 7 min read

Concrete cancer is the most expensive defect most strata buildings will ever face. It is also one of the most misunderstood. The phrase sounds dramatic, and the photographs are alarming. Chunks of slab edge missing, rust-stained render, exposed steel. But the underlying chemistry is straightforward, the early signs are easy to learn, and the remediation, while never cheap, is entirely manageable if it is caught in time.

This article explains, in plain language, what concrete cancer actually is, why coastal Queensland buildings are particularly exposed, what to look for, and what a proper remediation project should include.

What concrete cancer actually is

Reinforced concrete is a composite material. The concrete handles compression, and the steel bars cast inside it handle tension. The reason that works for decades is that fresh concrete is highly alkaline, and that alkalinity passivates the steel. It forms a thin protective film on every reinforcement bar that stops it from rusting, even though it is buried in a slightly damp material.

Concrete cancer begins when that protection is lost. There are two ways it usually happens. The first is carbonation, where carbon dioxide from the air slowly reacts with the concrete and reduces its alkalinity from the outside in. The second, and the one that matters more on the Australian coast, is chloride ingress. Salt from the air, from sea spray, or from poor-quality original concrete migrates through the cover layer and reaches the steel.

Once the steel loses its protective film, it begins to rust. Rust is iron oxide, and iron oxide occupies up to six times the volume of the metal it formed from. That expansion exerts enormous pressure on the surrounding concrete from the inside. The concrete cracks, then spalls. Meaning a chunk breaks away. And once a piece has fallen off, the steel inside is fully exposed to air and water and the corrosion accelerates. Left alone, the process is self-feeding and gets faster every year.

Why coastal Queensland is harder on concrete

Anywhere within roughly one kilometre of the Australian coast is classified as a high-corrosion zone for reinforced concrete. The Gold Coast, Tweed Heads and Brisbane Bayside are all in or near that zone, and many buildings sit well within it. Salt air carries chloride ions, sea spray deposits them directly, and the prevailing humidity keeps the concrete surface damp enough to let them migrate into the cover layer.

On top of that, much of the high-rise stock along this coast was built in the 1970s and 1980s when concrete cover requirements and waterproofing standards were less stringent than they are today. Reinforcement bars in those buildings often sit closer to the outside face than current Australian Standards would allow, which gives chloride a shorter path to reach them. The combination of marine exposure and thinner cover is the reason concrete cancer is so common in this part of the country. And the reason inspection cycles need to be shorter than they would be inland.

The early signs

The visible signs of concrete cancer almost always show up before a chunk falls off, and they are not hard to learn.

The first is rust staining: a brown streak running down the face of a slab edge, a balcony soffit, or a column. The stain has come from somewhere, and that somewhere is almost always a reinforcement bar starting to corrode. A single isolated stain might be a one-off. Perhaps a tie-wire left in the formwork. But repeated stains in the same area mean the bars themselves are involved.

The second is hairline cracking that follows a straight line. Reinforcement bars are laid in regular patterns, and as they expand they crack the concrete above them in those same patterns. A straight horizontal crack along a slab edge, or a line of small vertical cracks above a row of bars in a column, is a strong indicator that the steel below is working against the concrete.

The third is hollow-sounding concrete. Tapping a balcony soffit or render with a small hammer, a healthy area rings sharply. An area that has begun to delaminate. Where the bond between cover concrete and the substrate has broken. Sounds dull and hollow. A facade inspector will sound-test suspicious areas as a matter of routine.

Once you see visible spalling. Concrete missing and steel exposed. The problem is past its early stage and remediation is no longer optional.

What good remediation looks like

There is no shortcut here. Painting over rust stains, filling cracks with sealant, or rendering over hollow concrete are all examples of work that hides the problem for a year and makes it worse over five. Real remediation follows a standard sequence.

First, the affected area is mapped. Usually by a combination of visual inspection, sound testing and sometimes half-cell potential surveys that detect corrosion electrically before it is visible. The scope of repair is defined from that mapping, not from what the eye alone can see.

Second, the damaged concrete is removed back to sound material. That means cutting a clean perimeter around the affected zone with a saw or grinder, then breaking out everything inside it until the exposed bars are fully visible. This always reveals more damage than the original visible spall suggested. That is normal and expected.

Third, the exposed reinforcement is treated. Loose rust is removed by needle-gun or grit blasting, the bar is inspected for section loss, and if more than a defined percentage of the bar has corroded away it is replaced or supplemented with new steel lapped to the original. A corrosion-inhibiting primer is then applied to the cleaned bar.

Fourth, the cavity is reinstated with a polymer-modified repair mortar designed for structural concrete repair. Not standard render and not patching compound. The mortar is built up in layers, finished flush with the surrounding surface, and cured properly.

Finally, the entire affected elevation is treated with a protective coating system. This is the step that is most often skipped to save money and most often regretted. The repair patch itself is well protected, but the surrounding concrete is in the same chloride-loaded environment that caused the original failure. A breathable anti-carbonation coating slows the next cycle significantly and is what turns a one-off repair into a long-term solution.

Catching it early is the whole game

Concrete cancer remediation is expensive because access is expensive, because the work is skilled, and because the scope always grows once the concrete is opened up. None of that changes. What does change, dramatically, is the size of the affected area. And the size of the bill. Depending on when the problem is caught.

A single bar treated when the stain first appears is a one-day repair. The same bar treated five years later, after the spall has propagated along the slab edge and pulled the next three bars into the same process, is a full elevation project. The maths is simple, and it is the strongest argument there is for taking facade inspections seriously on any coastal building over fifteen years old.

Talk to the team

Need a real set of eyes on your building?

We provide facade inspections, coating specifications and remediation scopes across South East Queensland and Northern NSW.

Request a FREE quote